3DMSR Resin Cleaner Spray for 3D Resin Models – Effective Cleaning Solution for Post-Processing

Cooperation with 3DMasterStudio

Ever wonder how we in the 3D Printing industry are able to print 30kg of resin a month but only consume less than 0.5 liters of IPA Alcohol per month?

Introducing 3DMSR Resin cleaner. This is a mid-level non-toxic alkaline base liquid which use to remove excess monomers and/or oligomers from a component formed by polymerization. Although is a mid-level alkaline, it still not only allows an effective but also gentle removal of the aforementioned substances without damaging the polymerization part ( aka CURED PRINT ).

Differences.
Normally after print, you will soak the entire build platform, resin tank, and cure print into IPA Alcohol. This will make the IPA Alcohol contaminated at a fast rate. Although IPA Alcohol can be recycled by filtering and UV curing the IPA Alcohol will still be very sticky and cured resin or uncured resin is not easily soluble in normal soapy liquid and this makes cleaning with water is extremely hard.

But by using 3DMSR Resin Cleaner, things get easier and cleaner. Just spray and wash with water then dip it into IPA Alcohol to remove excessive water. Alcohol will be cleaner and a liter of IPA can last up to 4 months of use.
Scan the QR behind the bottle for the complete User Manual.

Include:
1x 300ml Resin Cleaner
2x Resin Filter
2x 3ply Mask
1x Nylon Brush

Compatible to:
All types of Resin, UV Resin/ UV Sensitive Resin, Standard PLA/PLA PRO UV Resin, Washable UV Resin, High-Temp UV Resin, High-Rigid Craftmanship UV Resin, Engineered High Strength High Toughness UV Resin, Standard Rigid/Flexible Resin, ABS/PC UV Resin.

Not Compatible to:
70A Flexible Resin, Silicon-Based Mold Resin.