PC Polycarbonate Filament 1KG 1.75mm – High Strength and Durability 3D Printing Material

Features:
Polycarbonate filament is a great 3D material because of it’s strength
A really strong material while still maintaining temperature resistance

Use:
Extruding temperature is generally around 260 C depending on the printer.
PC slowly softens when heated, Slower print speeds are preferred as an increase in temperature is required for faster prints.
Guando Build Sheet should be used on a heated bed.
Bed printing temperature: 100-120C
Bed adhesion: Glue stick, hair spray, cyanoacrylate, Kapton tape, ABS slurry, commercial solutions
Printer enclosure: Recommended (sometimes required)
All-metal hot end: Required

Note:
Please do not inhale any fumes. Heated up superglue can release toxic fumes, so only use in a well ventilated area.
It is a hygroscopic material, it is best to store in an airtight container when not in use

Material: PC Filament
Color: Transparent
Filament Diameter: 1.75mm
Tolerance: ±0.05mm
Print Temperature: 250~280℃
Infill Speed: 20-50mm/s
Heat-Bed Temperature: >110℃
Net Weight: 1KG
Gross Weight: 1.32KG
Izod Impact Strength Test: 700J/m
Heat Deflection Temperature: >= 120C