Anycubic Flexible Tough Resin for SLA Resin 3D Printer 1kg

【𝐍𝐨𝐭 𝐄𝐚𝐬𝐲 𝐭𝐨 𝐁𝐫𝐞𝐚𝐤 𝐖𝐡𝐢𝐥𝐞 𝐁𝐞𝐧𝐝𝐢𝐧𝐠】Balancing softness with strength, Anycubic Flexible Tough Resin can withstand bending, flexing, and compression. It shows good strength and elongation and can resit chipping, cracking and stress mark due for cyclic vibration movement.

【𝐇𝐢𝐠𝐡 𝐑𝐢𝐠𝐢𝐝𝐢𝐭𝐲 𝐚𝐧𝐝 𝐇𝐢𝐠𝐡 𝐈𝐦𝐩𝐚𝐜𝐭 𝐒𝐭𝐫𝐞𝐧𝐠𝐭𝐡】Parts printed with Anycubic Flexible Tough Resin are crash-proof and shows high impact strength. Besides, it can withstand high impact and other high strength mechanical pressure.

【𝐇𝐢𝐠𝐡 𝐏𝐫𝐞𝐜𝐢𝐬𝐢𝐨𝐧, 𝐋𝐨𝐰 𝐒𝐡𝐫𝐢𝐧𝐤𝐚𝐠𝐞】It can provide high accuracy, smooth surface, clear print details and low shrinkage rate advantages for model printing. Take a full shake before use in order to have a fully mix the functional components and fully mix the color paste in the resin. Otherwise, uneven coloring of the print may occur.

Compatible with all LCD 3D Printer with 395-405nm:

Specification:

Wavelength: 365-405nm

Density: 1.10~1.15g/cm3

Viscosity: 150-250MPa.s (25°C)

Hardness: 76D

Tensile Strength: 35~45MPa

Elongation at Break: 30~50%

Tensile Module of Elasticity: 800~1200MPa

Flexural Strength: 50~60MPa

Flexural Modulus: 900~1200MPa

IZOD Impact Strength: 50~60J/m

(1) Before use:

Shake the liquid resin before use;

Clean the resin tank and the molding platform to keep the bottom of the resin tank in light transmission.

(2) When using:

Unscrew the cap and add it to the resin tank according to the equipment requirements;

Select the correct print parameters and settings for printing.

(3) After use:

After printing, please use the matching tools for post-processing, including blade, diagonal pliers, tweezers, containers, gloves; ethanol (≥95%), lactate or isopropyl alcohol cleaning solution;

(4) Post-processing steps:

A. Remove the printed model from the molding platform with a blade;

B. Submerge the model in the cleaning solution, rinsed or ultrasonically washed, then taken out and drained; ANYCUBIC Wash and Cure machines are suggested to ensure better effect. In order to achieve a good toughness effect, it is recommended that the post-curing time should not exceed 30s；

C. Proper processing, such as removing support, polishing, coloring, etc.

Packaging List:

Anycubic Flexible Tough Resin 1kg color of your choice x1