Everytime after a print, you have to remove the model & do the curing process.
Standard curing process involves:
-Removing the model from the build plate
-Dump it into IPA, rise and wash it for a few minutes
-Take it out and put it around the around the UV light to cure it for another few minutes.
Whole process can be troublesome as you have to move the model here & there, can make your place sticky and harder to clean.
This All in One Machine is designed to make everything easy.
-BIG SPACE SAVER
Old setup such tuppeware of IPA for initial wash, an ultrasonic cleaner for a second rinsing, and then a UV leds with rotating display stand. This device replaced all of that so you can have more space to show off your model.
Move your build plate here, and adjust the height of the build plate holder and submerge it into the IPA. Less chance of resin dropping on your floor making it sticky.
-360 DEGREE CURING + SAFETY
Like washing mode, choose 1~60 minute cure time. Once started, an array of UV lights is activated while the curing platform rotates 360 degrees. With Yellow lid, it protect your eye from UV Light.
Control method: digital tube, led indicator, control knob
Input Voltage: AC110/220V 50/60Hz
UV lights: 405nm
Curing and Washing time: 1-60min
Max model size for washing: 120mm(L)*74mm(W)*165mm(H)
Max model size for curing: 140mm(D)*165mm(H)
Machine size: 225mm(L)*235mm(W)*365mm(H)
Anycubic Wash & Cure Machine x 1