Bambu Lab 4 in 1 PTFE Adapter – Multiple Feeder Tube for P1 & X1 Series 3D Printer Accessories

Bambu Lab 4 in 1 PTFE Adapter
🔥 In-stock KL (Sungai Besi)
🚀 Ship in 24hrs! Mon-Sat 10AM-6PM, Closed on Sunday.
🚚 Pick “Seller’s Fleet” at checkout for self-collect or same-day delivery services via Lalamove, Grab. Buyer covers fee. Set Smith3D Sungai Besi Office Lot as pickup point.

🛡️7 Days 1 to 1 Defective Replacement Warranty

Features:
• The Bambu 4-in-1 PTFE Adapter is an adapter used to connect the PTFE tube. Compared to the original PTFE tube connector, the 4-in-1 adapter can connect 4 feeder modules to the printer at the same time. (up to 7 different filaments: 1 AMS and other 3 filaments)

• It can help users to connect the printer to AMS along with other filaments which are not compatible with AMS such as TPU 95A, Bambu PET-CF and other brands’ carbon-fiber/glass-fiber contained filaments.

Instructions:
1. When using AMS:
– Connect the PTFE tube from the tool head to the OUT end of the Bambu 4-in-1 PTFE Adapter.
– Connect the PTFE tube from the buffer output to one of its IN ends. – Directly insert a maximum of three filament wires into each hole of the Bambu 4-in-1 PTFE Adapter IN end.

2. When the AMS is not being used:

– Connect the PTFE tube from the tool head to the OUT end of the Bambu 4-in-1 PTFE Adapter.
– Directly insert a maximum of four filament wires into each hole of the Bambu 4-in-1 PTFE Adapter IN end.

It is important to note that reversing connections may cause filament blockage. Therefore, it is essential to ensure that the installation direction is correct.

NOTE:
• Filaments fed by the AMS will be automatically recycled into the AMS after printing is complete. If you need to use filament not stored in the AMS for temporary printing, you can hang the filament on the spool holder and pass it through the No. 1 PTFE tube. After manually loading it, you can start printing.

• If you need to use filaments with higher storage conditions for printing, after unloading the filaments onto the spool holder, you can use an external drying box with a filament inside. Then, manually load the filament through the No. 3 or 4 PTFE tube, and proceed to start printing.

• When using the 4-in-1 PTFE Adapter with AMS, make sure that the filament path is smooth, avoiding sharp bends that may over-constrain the PTFE tubes.

• If you encounter AMS loading/unloading issues, check the filament path to ensure it is as smooth as possible, without any tight bends.

Compatibility:▪ Bambu Lab P1P
▪ Bambu Lab P1S
▪ Bambu Lab X1
▪ Bambu Lab X1C
▪ Bambu Lab X1E

📦 Package Includes:
▪ Bambu Lab 4 in 1 PTFE Adapter

🛡️ WARRANTY NOTE
▪ 7 Days 1 to 1 Defective Replacement Warranty
▪ We will not make any warranties or accept any responsibility for any misuse by the user.
▪ For more details regarding provided warranty, visit
| https://www.smith3d.com/pages/faq/ |

📞 ZeroOneZero-344 3128
💬 Shopee Chat/Call/WhatsApp for enquiries.

🏬 | Office Lot |
SMITH3D SDN BHD,
Medan Niaga Tasik Damai,
Sungai Besi, 57000 Kuala Lumpur